Supermicro SuperServer 1029UZ-TN20R25M, Complete System Only

Print

Print

SYS-1029UZ-TN20R25M

SuperServer 1029UZ-TN20R25M (Black)

Dual Socket P (LGA 3647)2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,3 UPI up to 10.4GT/sSupport CPU TDP 70-205W

Up to 28 Cores

‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)

24 DIMM slotsUp to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMMSupports Intel® Optane™ DCPMM††

2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM

† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro†† Cascade Lake only. Contact your Supermicro sales rep for more info.

Intel® C621 chipset

SATA3 (6Gbps); RAID 0, 1, 5, 10

2 25GbE SFP28 ports via AOC-URN4-M2TS (Mellanox ConnectX-4 Lx EN)Download networking card drivers here

Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

ASPEED AST2500 BMC

8 NVMe ports + 2 SAS/SATA3/NVMe Hybrid Ports (from CPU 1) 10 NVMe ports (from CPU 2)

2 25GbE SFP28 ports 1 RJ45 Dedicated IPMI LAN port

3 USB 3.0 ports(2 rear, 1 Type A)2 USB 2.0 ports(front)

1 VGA port

1 Serial header

2 SuperDOM (Disk on Module) ports

AMI 32Mb SPI Flash ROM

Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor® 5 WatchDog

ACPI Power Management

Monitors for CPU Cores, Chipset Voltages, Memory.4+1 Phase-switching voltage regulator

Fans with tachometer monitoringStatus monitor for speed controlPulse Width Modulated (PWM) fan connectors

Monitoring for CPU and chassis environmentThermal Control for fan connectors

SuperServer 1029UZ-TN20R25M (Black)

Dual Socket P (LGA 3647)2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,3 UPI up to 10.4GT/sSupport CPU TDP 70-205W

Up to 28 Cores

‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)

24 DIMM slotsUp to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMMSupports Intel® Optane™ DCPMM††

2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM

† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro†† Cascade Lake only. Contact your Supermicro sales rep for more info.

Intel® C621 chipset

SATA3 (6Gbps); RAID 0, 1, 5, 10

2 25GbE SFP28 ports via AOC-URN4-M2TS (Mellanox ConnectX-4 Lx EN)Download networking card drivers here

Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

ASPEED AST2500 BMC

8 NVMe ports + 2 SAS/SATA3/NVMe Hybrid Ports (from CPU 1) 10 NVMe ports (from CPU 2)

2 25GbE SFP28 ports 1 RJ45 Dedicated IPMI LAN port

3 USB 3.0 ports(2 rear, 1 Type A)2 USB 2.0 ports(front)

1 VGA port

1 Serial header

2 SuperDOM (Disk on Module) ports

AMI 32Mb SPI Flash ROM

Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor® 5 WatchDog

ACPI Power Management

Monitors for CPU Cores, Chipset Voltages, Memory.4+1 Phase-switching voltage regulator

Fans with tachometer monitoringStatus monitor for speed controlPulse Width Modulated (PWM) fan connectors

Monitoring for CPU and chassis environmentThermal Control for fan connectors

1U Rackmount

CSE-116UTS-R1K62P-T

1.7" (43mm)

17.2" (437mm)

27.8" (706mm)

48 lbs (21.8 kg)

Black

Power On/Off button System UID button

Power LED Hard drive activity LED Network activity LEDs UID LED

2 PCI-E 3.0 x8 slots (FH, FL) For 20 NVMe configuration, only 1 PCI-E 3.0 x8 is available. For 18 NVMe configuration, 2 PCI-E 3.0 x8 will be available.(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

20 Hot-swap 2.5" 7mm drive bays20 NVMe (CPU1: 10 NVMe, CPU2: 8 NVMe + 2 NVMe/SATA/SAS hybrid)

1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110) or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional parts2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2

8 Heavy duty fans with optimal fan speed control

2 Air Shroud

1600W/1000W

73.5 x 40 x 203 mm

100-127Vac / 13 - 9A / 50-60Hz200-240Vac / 10 - 8A / 50-60Hz

Max: 83.3A / Min: 0A (100-127Vac)Max: 133A / Min: 0A (200-240Vac)

Max: 2.1A / Min: 0A

25 Pairs Gold Finger Connector

Titanium Level [ Test Report ]

RoHS Compliant

Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)Operating Relative Humidity: 8% to 90% (non-condensing)Non-operating Relative Humidity: 5% to 95% (non-condensing)

1U Rackmount

CSE-116UTS-R1K62P-T

1.7" (43mm)

17.2" (437mm)

27.8" (706mm)

48 lbs (21.8 kg)

Black

Power On/Off button System UID button

Power LED Hard drive activity LED Network activity LEDs UID LED

2 PCI-E 3.0 x8 slots (FH, FL) For 20 NVMe configuration, only 1 PCI-E 3.0 x8 is available. For 18 NVMe configuration, 2 PCI-E 3.0 x8 will be available.(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

20 Hot-swap 2.5" 7mm drive bays20 NVMe (CPU1: 10 NVMe, CPU2: 8 NVMe + 2 NVMe/SATA/SAS hybrid)

1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110) or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional parts2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2

8 Heavy duty fans with optimal fan speed control

2 Air Shroud

1600W/1000W

73.5 x 40 x 203 mm

100-127Vac / 13 - 9A / 50-60Hz200-240Vac / 10 - 8A / 50-60Hz

Max: 83.3A / Min: 0A (100-127Vac)Max: 133A / Min: 0A (200-240Vac)

Max: 2.1A / Min: 0A

25 Pairs Gold Finger Connector

Titanium Level [ Test Report ]

RoHS Compliant

Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)Operating Relative Humidity: 8% to 90% (non-condensing)Non-operating Relative Humidity: 5% to 95% (non-condensing)