Supermicro SuperServer 6019U-TRT, Complete System Only

Print

Print

SYS-6019U-TRT

SuperServer 6019U-TRT (Black)

Dual Socket P (LGA 3647)2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,Dual UPI up to 10.4GT/sSupport CPU TDP 70-205W

Up to 28 Cores

‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.

24 DIMM slotsUp to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMMSupports Intel® Optane™ DCPMM††

2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM2666 ECC DDR4 NVDIMM

† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro†† Cascade Lake only. Contact your Supermicro sales rep for more info.

Intel® C621 chipset

SATA3 (6Gbps); RAID 0, 1, 5, 10

2 10GBase-T ports via AOC-UR-I2XT (Intel® X540)

Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

ASPEED AST2500 BMC

4 SATA3 (6Gbps) ports

2 RJ45 10GBase-T Ethernet ports 1 RJ45 Dedicated IPMI LAN port

3 USB 3.0 ports (2 rear, 1 Type A)

2 VGA ports (1 rear, 1 onboard)

1 Serial header

2 SATA DOM (Disk on Module) support with embedded power

AMI 32Mb SPI Flash ROM

Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor® 5

ACPI Power Management

Monitors for CPU Cores, Chipset Voltages, Memory.4+1 Phase-switching voltage regulator

Fans with tachometer monitoringStatus monitor for speed controlPulse Width Modulated (PWM) fan connectors

Monitoring for CPU and chassis environmentThermal Control for fan connectors

SuperServer 6019U-TRT (Black)

Dual Socket P (LGA 3647)2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,Dual UPI up to 10.4GT/sSupport CPU TDP 70-205W

Up to 28 Cores

‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.

24 DIMM slotsUp to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMMSupports Intel® Optane™ DCPMM††

2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM2666 ECC DDR4 NVDIMM

† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro†† Cascade Lake only. Contact your Supermicro sales rep for more info.

Intel® C621 chipset

SATA3 (6Gbps); RAID 0, 1, 5, 10

2 10GBase-T ports via AOC-UR-I2XT (Intel® X540)

Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

ASPEED AST2500 BMC

4 SATA3 (6Gbps) ports

2 RJ45 10GBase-T Ethernet ports 1 RJ45 Dedicated IPMI LAN port

3 USB 3.0 ports (2 rear, 1 Type A)

2 VGA ports (1 rear, 1 onboard)

1 Serial header

2 SATA DOM (Disk on Module) support with embedded power

AMI 32Mb SPI Flash ROM

Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor® 5

ACPI Power Management

Monitors for CPU Cores, Chipset Voltages, Memory.4+1 Phase-switching voltage regulator

Fans with tachometer monitoringStatus monitor for speed controlPulse Width Modulated (PWM) fan connectors

Monitoring for CPU and chassis environmentThermal Control for fan connectors

1U Rackmount

CSE-819UTS-R751P-T

1.7" (43mm)

17.2" (437mm)

29.7" (754mm)

Net Weight: 26 lbs (11.8 kg)Gross Weight: 41 lbs (18.6 kg)

Black

Power On/Off button System Reset button

Power LED Hard drive activity LED Network activity LEDs System Overheat LED / Fan fail LED / UID LED

2 PCI-E 3.0 x16 (Full-height, 10.5" L) 2 PCI-E 3.0 x8 (1 LP, 1 internal LP)(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

4 Hot-swap 3.5" drive bays4 SATA3 (optional SAS3 via AOC)

1 M.2 PCI-E 3.0 x4 M-Key NVMe or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional riser card (see optional parts list) 2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2

8 Heavy duty fans with optimal fan speed control

1 Air Shroud

100-127Vac, 50-60Hz200-240Vac, 50-60Hz

Max: 62.5A & Min: 0A (100Vac-127Vac)Max: 62.5A & Min: 0A (200Vac-240Vac)

Max: 2.1AMin: 0A

Platinum Level [ Test Report ]

RoHS Compliant

Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)Operating Relative Humidity: 8% to 90% (non-condensing)Non-operating Relative Humidity: 5% to 95% (non-condensing)

1U Rackmount

CSE-819UTS-R751P-T

1.7" (43mm)

17.2" (437mm)

29.7" (754mm)

Net Weight: 26 lbs (11.8 kg)Gross Weight: 41 lbs (18.6 kg)

Black

Power On/Off button System Reset button

Power LED Hard drive activity LED Network activity LEDs System Overheat LED / Fan fail LED / UID LED

2 PCI-E 3.0 x16 (Full-height, 10.5" L) 2 PCI-E 3.0 x8 (1 LP, 1 internal LP)(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

4 Hot-swap 3.5" drive bays4 SATA3 (optional SAS3 via AOC)

1 M.2 PCI-E 3.0 x4 M-Key NVMe or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional riser card (see optional parts list) 2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2

8 Heavy duty fans with optimal fan speed control

1 Air Shroud

100-127Vac, 50-60Hz200-240Vac, 50-60Hz

Max: 62.5A & Min: 0A (100Vac-127Vac)Max: 62.5A & Min: 0A (200Vac-240Vac)

Max: 2.1AMin: 0A

Platinum Level [ Test Report ]

RoHS Compliant

Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)Operating Relative Humidity: 8% to 90% (non-condensing)Non-operating Relative Humidity: 5% to 95% (non-condensing)